Question
Is there a way to decrease or increase the display of loads on the screen?
Answer
In Display Option > Size > Label Symbol, you can adjust the size of various symbols and markings.
[Image-1] When Label Symbol Size is 50%
The Load indicator may not be visible on the screen because 'Zoom Fit' zooms the currently active model to fit the full size of the workspace.
If you want the model to fit the full size of the screen and only reduce the load, use the following features.
Display Option > Size > Label Symbol : Label Symbol allows you to adjust the size of various symbols and markings.
Note : The Label Size is 50% by default.
[Image-2] Label Symbol Size Settings
The next Image shows the model when the Label Symbol Size is reduced to 10%.
[Image-3] When Label Symbol Size is 10%
The next Image shows the size when Beam End Release is set to Default.
[Image-4] When Label Symbol Size is 50%
In the above image, the Beam End Release Symbol may not be clearly visible, but by increasing the Label Symbol size, you can see it more prominently. (Label Symbol: 100%)
[Image-5] When Label Symbol Size is 100%
Additionally, this function applies to symbols like Support, Plate End Release, Mass, Local Axis, Node Local Axis, Elastic Link, and more.