Skip to main content
Members and License Created Edited

[Authentication] How to Authenticate GEOXD License

Question

I'm curious about how to authenticate the GEOXD license.

 

Answer

MIDAS program offers two authentication methods: "Web Authentication" which requires an internet connection, and "Hardware Lock Authentication" which involves inserting a USB hardware lock into the main body of the device.

The two authentication methods are chosen at the time of product purchase, and you need to proceed with the authentication process differently depending on the chosen method when using the program.

Below, the step-by-step process for each authentication method is classified for your reference, so please follow the instructions provided to complete the authentication.

 

1. Close file

To close the open files in GEOXD after launching the program, click on the GEOXD icon at the top left corner, and then press the [Close] button to close the files.

 

2. Run 'Register Protection License' 

After closing the file, click on 'Register Protection Key' at the top of the screen to run it.

 

3. Select the authentication method and proceed with the authentication

After activating the "Register Protection License" window, select the authentication method from the top and proceed with the authentication.

 

  • Web Authentication

1) Select [Web Authentication].

2) Enter the 'ID/Email/Password/Key Number' in the 'License Authentication' field.

3) Click the [Lock Option Configuration] button.

4) In the activated 'Program Licensing Configuration' window, select the product to use.

5) Click the [Update] button at the bottom of the 'Program Licensing Configuration' window, then click [OK].

6) Click the [OK] button at the bottom of the 'Register Protection License' window.

 

 

  • Hardware Lock

1) Insert the Hardware Lock to be used into the main body

2) Select [Other Type].

3) Enter the 'Key Number' in the 'License Authentication' field.

4) Click the [OK] button at the bottom of the 'Register Protection License' window.

 

 

If you do not wish to see the 'Register Protection License' window every time GEOXD is launched, you can check the 'Do not display this dialog at startup' option at the bottom of the 'Register Protection License' window.

0
Was this article helpful?