Go to MIDAS CAD INFRA-DESIGN V200 Release Note ↗
MIDAS CIM V200 Hotfix 4.0 (24.09.12)
The CIM V200 Hotfix 3.0 version was processed for distribution in China, while Hotfix 4.0 will be distributed in Korea and globally.
[Stiffener] Improved Allocation Logic through Sweep Lock Option
Members with curved shapes, such as steel arch members, need to be placed according to the designer’s intent, offering various options.
CIM V200 provides a Sweep Lock option to place members according to the path and direction settings. In V200 Hotfix 3.0, the allocation logic was improved to precisely place the arch ribs of curves
(in response to a request from a Chinese customer).
[Diaphragm] Improved Rotation Direction Logic when Placing Diaphragms with Plane Offset on Curved Alignments
Diaphragms modeled in Curve Library Mode should be placed at a consistent interval from the start and end points according to the input value of the Plane Offset option.
The basic placement logic was improved to ensure that the direction of rotation is maintained in the Normal direction of the path.
[Stiffener Slot-Split] Fixed Errors in Slot-Split Function for U-Shaped Stiffeners
Errors were identified and fixed in the Slot-Split function for U-shaped stiffeners.
[Library Mode, 2D Plane] Fixed Drawing Synchronization Errors in Library Mode
An issue was identified and fixed where models in Library Mode could not be saved and returned to Base Mode after drawing synchronization.
[Text Format] Fixed Errors in Text Format Operation in Assembly Unit Mode
Errors related to text formatting during model construction using Text Format in Assembly Unit Mode were fixed.
(in response to a request from a Romanian customer)
MIDAS CIM V200 Hotfix 2.0 (24.08.13)
[Convinience] Changed Link Connection on the CIM Main Page
The links have been updated to connect to the tutorial pages on the product and technical sites.
[Assign] Added Field Data Match Feature within Assign Property
A copy-matching feature between objects has been added to make it easier to manage property information.
[Diaphgram & Stiffener] Improved Calculation Time for Tapered Section Placement
The logic for Face Tracking during Slot/Split and Array of Stiffeners has been improved, significantly reducing the time required for Array operations.
[Stiffener] Changed Default Settings for Array Function
The default settings for the Stiffener Array feature have been changed to enhance convenience.
[Text Format] Support for Line Type-User Section in Text Format
The new Line Type-User Section feature in CIM V200 has been improved to allow model creation using Text Format.
[Text Format] Added Support for Geographic Coordinates in Text Format
When creating alignments using Text Format, a Geographic Coordinate option has been added, allowing the input of civil engineering coordinates.
Previously, only model coordinates were supported, requiring a coordinate conversion process for real-world coordinate input, but in this improved version, alignments can be created using actual civil coordinates.
[IFC Import] Improved to Import IFC Objects Close to the Origin
The ability to import IFC objects that are far from the origin and place them near the origin has been added.
MIDAS CIM V200 Hotfix 1.0 (24.06.20)
[IFC Export] Added IFC 4.3 Schema for Alignments
Exports layout information using the IfcAlignment schema.
[Field Set] Added Export Functionality
The Field settings environment can now be exported as a CSV file to be shared with other CIMZ files.
[Field Viwer] Improved Handling of Empty Cells When Copying/Pasting Excel Data
The improvement allows empty cells in the copied range from Excel to be included when pasting.
[Rebar Modeling] Fixed Missing Apply Button in Rebar Draw Mode and Property Window
[Curve Library] Improved UI Behavior for Alignment Direction in Curve Library Assign
The improvement ensures that the Define Path selection is not deselected when changing the Alignment Direction.
[User Section Mode] Simplified Functionality When Creating Template Sections
- Previous: Enter section specifications → Click Insert button → Click on the modeling screen
→ Click Add Section button - Improved: Enter section specifications → Click Insert button → Click on the modeling screen (automatically adds section)
New Features of MIDAS CIM V200
[Layout] Label Display Improvement
We have improved the graphics for displaying labels that indicate the start/end points and segments of layout, enhancing visibility.
[Parameter] Expanded Constraint Functionality ⇾ Added Tangent Option
A Tangent option has been added to the Constraint feature, allowing for the application of contact conditions in modeling tasks using parameters.
Manual Link : Constraint
[Modeling] General Member ⇾ Assign Using Sweep Lock Option
The General Member feature has been revamped to facilitate the creation of objects by applying cross-sections along a path. The Sweep Lock option allows control of the cross-section's rotation axis, enabling the creation of various 3D shapes such as arches.
Manual Link : General Member
Technical Doc. Link : Description of Tangential, Parallel, and Sweep Lock options
[Modeling] Curve Library ⇾ Assign Using Sweep Lock Option
In Base Mode, Tangential, Parallel, and Sweep Lock options have been added to the Curve Library Assign - By Select method, allowing control over the resulting shape of the Curve Library assignment.
Additionally, during the assignment of the Curve Library to the Sub Path within an Assembly Unit, you can now choose between Unconstrained, Tangential, and Parallel options.
Manual Link : Curve Library Assign
Technical Doc. Link : Description of Tangential, Parallel, and Sweep Lock options
[Modeling] Added Line Type Member Creation Function ⇾ (User Section Mode)
To facilitate the modeling of thin members specialized for steel bridges, CIM V200 has incorporated the creation of Line Type Members in addition to the existing Plane Type. Modeling is conducted by assigning thickness to line objects, prioritizing Section Lines during modeling to ensure proper application of Fitting tools and targets.
For detailed information, please refer to the manual.
Manual Link : Section Line for Line Type
[Modeling] Added Diaphragm Stiffener & Manhole Creation Function
In most steel bridge design plans where diaphragms are applied, horizontal and vertical stiffeners and manholes are essential. Just as rebar modeling is emphasized in concrete bridges, CIM V200 has incorporated the creation functions for diaphragm stiffeners and manholes to simplify the modeling of steel bridges.
For detailed information, please refer to the manual.
Manual Link : Draw Diapharam
[Modeling] Haunch
In concrete structure planning, haunches or chamfers are prescribed to ensure smooth stress transfer in sections where the direction of stress changes abruptly due to sectional forces.
In CIM V200, during the creation of 3D models, the software has been developed to allow the addition of haunches or the flexible application of section sizes according to design plans without predefining these haunches.
For detailed information, please refer to the manual.
Manual Link : Haunch(User Section Mode)
[Field Data] Field Viewer
In CIM V190, an environment for Field Data, which allows embedding information into objects, was established. In the latest CIM V200, a Field Viewer has been provided to allow users to view custom-entered Field Data through a separate popup window.
The inherent Geometry Data of objects can be checked as Basic Property, while custom-entered information, such as Object Breakdown Structure (OBS), can be displayed separately as Property Data and Quantity Data.
Additionally, you can directly access the Field Viewer by clicking on the symbol that appears after selecting a created object.
For detailed information, please refer to the manual.
Manual Link : Field Viewer
[Field Set] Text Format Import
As a BIM model serves as an information model, it requires the input and management of a vast amount of information. While CIM V190 established a system for containing information, CIM V200 enhances related functionalities and introduces new user convenience features.
Field Set allows users to edit extensive information forms using editing tools similar to Excel and enables batch creation through CSV file imports.
Manual Link : Field Set, Text Format : Field Set
[Field Data] Object Group
The model of a structure is composed of multiple object units. For instance, modeling a bridge structure involves combining smaller units such as foundations, columns, and copings.
To assign management information to such structured models, CIM V200 allows management information to be assigned not only to individual objects like foundations, columns, and copings, but also to the structure as a whole.
One method of utilization is through the Object Group feature, which groups objects together. This allows information to be assigned to the model as a whole. Additionally, when models are exported in IFC file format, grouped models can be managed at the group level.
For detailed information, please refer to the manual.
Manual Link : Object Group
[IFC Export] Improvements Including GUID Preservation
Files with the IFC extension appear in the Industry Foundation Classes (IFC) file format, which sets international standards for importing and exporting objects and their properties for components. To ensure compatibility between different software applications, it is essential to support the latest IFC versions specified by buildingSMART International.
In the previous CIM V190, development and integration were carried out to enable exporting to the latest IFC version, IFC4.3. In CIM V200, ongoing improvements have been made to ensure that even if properties of the model change, their unique GUIDs are preserved.
Moving forward, for clients utilizing CIM, support for the latest maintenance of the IFC file format, which is crucial for BIM model compatibility, will be continued.
[IFC Export] Support for IFC Multi Schema
The IFC Export option has been enhanced to support both IFC4 and IFC4×3.
[IFC Export] Performance Improvement in IFC Export
In comparison to CIM V190, the average file creation speed in IFC Export has been improved by approximately sixfold, enhancing usability.
[Convenience] Save in Mode (File Saving in Library Mode)
Previously, in CIM models, file saving was restricted to Base Mode only, causing inconvenience. To address this issue, in CIM V200, it is now possible to save files while working in Library Mode. Even after closing the program, when reopening the file, users can continue their modeling work in Library Mode from the last saved state.
Furthermore, the speed of Mode Open processes for file reopening has been improved by approximately twofold on average.
[Convenience] Addition of Texture Images
To apply various material effects, CIM V200 has incorporated nine new texture images, allowing them to be applied to models.
[Convenience] Addition of Graphics File Export
To enhance the usability of models created in CIM, the range of files that can be exported as Graphics Files has been expanded. Export to Wavefront OBJ format (.obj), GL Transmission Format (binary) (.glb), and Autodesk FBX (binary) (*.fbx) is now possible.