Function
機能
- Enter the types of members used in the design of Reinforced Concrete members.
- 鉄筋コンクリート部材の設計に使用される部材の種類を入力します。
Call
呼び出し
From main menu, select [Design] tab > [Design Input Data] > [Design Parameters] > [Modify Member Type]
メインメニューから [Design] タブ >[Design Input Data] > [Design Parameters] > [Modify Member Type]
Input
入力
First, select the members in the model and enter the following :
最初にモデルからメンバーを選択し、次を入力します:
Option
Select Add/Replace or Delete.
Add/Replace : Add the newly entered type or update the previously entered type.
Delete : Delete the entered type. Data entry is not required when deleting.
Option
Add/ReplaceまたはDeleteを選択します。
Add/Replace : 新しく入力したタイプを追加するか、以前に入力したタイプを更新します。
Delete : 入力したタイプを削除します。 削除時にデータ入力は必要ありません。
Member Type
(refer to (1) )
Enter the member type to be used in design.
Beam : Beam member
Column : Column member
: Apply the entered type to the selected members.
: Close the entry Dialog Bar.
Member Type
(参照 (1) )
設計に使用する部材のタイプを入力します。
Beam : 堰の部材です
Column : 柱部材
: 入力したタイプを選択したメンバーに適用します。
: アイテム ダイアログ ボックスを閉じます。
(1)
For member types not defined by the user, the program defines the member types according to the following by comparing the coordinates of the two nodes of each member:
Column members: Members with the local x-axis parallel to the GCS Z-axis
Beam members: Members with the local x-axis parallel to GCS X-Y plane
(2)
When the member type is repeatedly defined for the same member, the type will be updated to the last type entered.
(3)
The entered member types can be reviewed in the data table arranged in the order of element numbers. The user may Modify/Add and Delete items in the data table.
Access the data table following the procedure below.
From the Main Menu select Design > General Design Parameter > General Design Tables > Modify Member Type.
From the Tables tab of the Tree Menu select Design Tables > General Design > Modify Member Type.
(1)
ユーザーが定義していないメンバータイプの場合、プログラムは各メンバーの2つのノードの座標を比較し、次に従ってメンバータイプを定義します:
Column members: 局部x軸がGCS Z軸と平行な部材
Beam members: 局部x軸がGCSX-Y平面と平行な部材
(2)
同じメンバーに対してメンバー タイプが繰り返し定義されると、タイプが最後に入力したタイプに更新されます。
(3)
入力されたメンバーのタイプは、要素番号順にリストされているデータ テーブルでレビューできます。 ユーザーは、データ テーブル内のアイテムを修正/追加および削除できます。
以下の手順に従って、データ テーブルにアクセスします。
メインメニューから、Design > General Design Parameter > General Design Tables > Modify Member Typeを選択します。
Tree MenuのTablesタブで、Design Tables > General Design > Modify Member Typeを選択します。