1. 概要
このコンポーネントは、Civil NX/GEN NX の「RS荷重ケース」機能を実行します。応答スペクトル解析に使用する荷重ケース、スペクトル関数、および荷重方向を入力します。
「RS荷重ケース」機能は、Civil NX/GEN NX のメインメニューから選択できます。
[Load] Tab > [Dynamic Loads] Tab > [Response Spectrum Data] Group > [RS Load Cases] Menu
2. Grasshopper パス
[Midas] > [Dynamic Load] > [RS Load Cases]
Damping Method Type 1 : Undefined
3. コンポーネント画像
4. 入力／出力値
- 入力データ
| Index | Name | Description | Type | Default |
Previous |
|---|---|---|---|---|---|
| 1 | KEY | Spectrum Load Case ID | Integer | - | - |
| 2 | NAME | Spectrum Load Case Name | String | - | - |
| 3 | DESC | Description | String | - | - |
| 4 | ANGLE | Excitation Angle | Real | 0 | - |
| 5 | SCALE | Scale Factor | Real | - | - |
| 6 | PMFT | Period Modification Factor | Real | - | - |
| 7 | aFUNCNAME | Spectrum Name | String | - | - |
| 8 | aUSEMODE * |
Mode List [Use,Factor] |
Array [Boolean,Real] |
- | - |
| 9 | Direction | Direction | Select | X-Y | - |
| 10 | Modal Combination Type | Modal Combination Type | Select | CQC | - |
| 11 | Add signs to the results | Add signs to the results | Select | false | - |
| 12 | Add signs to the results type | Add signs to the results type | Select | Along the Absolute Maximum Value | - |
| 13 | Select mode shapes | Select mode shapes | Select | false | - |
| 14 | Interpolation of spectral data | Interpolation of spectral data | Select | Linear | - |
| 15 | Apply Damping Method | Apply Damping Method | Select | false | - |
Activation Condition
* Only for if Select mode shapes is true
- 出力データ
| Index | Command | Description | Type | Method |
Next |
|---|---|---|---|---|---|
| 1 | SPEC |
Create RS Load Cases (Damping is Undefined) |
Json | PUT/DELETE | - |
Damping Method Type 2 : Modal
3. コンポーネント画像
4. 入力／出力値
- 入力データ
| Index | Name | Description | Type | Default |
Previous |
|---|---|---|---|---|---|
| 1 | KEY | Spectrum Load Case ID | Integer | - | - |
| 2 | NAME | Spectrum Load Case Name | String | - | - |
| 3 | DESC | Description | String | - | - |
| 4 | ANGLE | Excitation Angle | Real | 0 | - |
| 5 | SCALE | Scale Factor | Real | - | - |
| 6 | PMFT | Period Modification Factor | Real | - | - |
| 7 | aFUNCNAME | Spectrum Name | String | - | - |
| 8 | aUSEMODE * |
Mode List [Use,Factor] |
Array [Boolean,Real] |
- | - |
| 9 | DALL | Damping ratio for all modes | Real | - | - |
| 10 | aDAMPING |
Modal damping overrides - damping ratio List [Mode,Factor] |
Array [Integer,Real] |
- | - |
| 11 | Direction | Direction | Select | X-Y | - |
| 12 | Modal Combination Type | Modal Combination Type | Select | CQC | - |
| 13 | Add signs to the results | Add signs to the results | Select | false | - |
| 14 | Add signs to the results type | Add signs to the results type | Select | Along the Absolute Maximum Value | - |
| 15 | Select mode shapes | Select mode shapes | Select | false | - |
| 16 | Interpolation of spectral data | Interpolation of spectral data | Select | Linear | - |
| 17 | Correction by Damping Ratio | Correction by Damping Ratio | Select | false | - |
Activation Condition
* Only for if Select mode shapes is true
- 出力データ
| Index | Command | Description | Type | Method |
Next |
|---|---|---|---|---|---|
| 1 | SPEC |
Create RS Load Cases (Modal) |
Json | PUT/DELETE | - |
Damping Method Type 3 : Mass & Stiffness
3. コンポーネント画像
4. 入力／出力値
- 入力データ
| Index | Name | Description | Type | Default |
Previous |
|---|---|---|---|---|---|
| 1 | KEY | Spectrum Load Case ID | Integer | - | - |
| 2 | NAME | Spectrum Load Case Name | String | - | - |
| 3 | DESC | Description | String | - | - |
| 4 | ANGLE | Excitation Angle | Real | 0 | - |
| 5 | SCALE | Scale Factor | Real | - | - |
| 6 | PMFT | Period Modification Factor | Real | - | - |
| 7 | aFUNCNAME | Spectrum Name | String | - | - |
| 8 | aUSEMODE * |
Mode List [Use,Factor] |
Array [Boolean,Real] |
- | - |
| 9 | MASSC | Direction Specification for Mass Proportional | Real | 0 | - |
| 10 | STIFFC | Direction Specification for Stiffness Proportional | Real | 0 | - |
| 11 | iCALC |
Coefficients Calculation Method
· Frequency : "1" |
Integer | - | - |
| 12 | FP1 | Frequency / Period - Mode 1 | Real | - | - |
| 13 | FP2 | Frequency / Period - Mode 2 | Real | - | - |
| 14 | DR1 | Damping Ration - Mode 1 | Real | - | - |
| 15 | DR2 | Damping Ration - Mode 2 | Real | - | - |
| 16 | Direction | Direction | Select | X-Y | - |
| 17 | Modal Combination Type | Modal Combination Type | Select | CQC | - |
| 18 | Add signs to the results | Add signs to the results | Select | false | - |
| 19 | Add signs to the results type | Add signs to the results type | Select | Along the Absolute Maximum Value | - |
| 20 | Select mode shapes | Select mode shapes | Select | false | - |
| 21 | Interpolation of spectral data | Interpolation of spectral data | Select | Linear | - |
| 22 | Correction by Damping Ratio | Correction by Damping Ratio | Select | false | - |
| 23 | Damping Type | Damping Type | Select | Direct Specification | - |
| 24 | Mass Proportional | Mass Proportional | Select | true | - |
| 25 | Stiffness Proportional | Stiffness Proportional | Select | true | - |
Activation Condition
* Only for if Select mode shapes is true
- 出力データ
| Index | Command | Description | Type | Method |
Next |
|---|---|---|---|---|---|
| 1 | SPEC |
Create RS Load Cases (Mass & Stiffness) |
Json | PUT/DELETE | - |
Damping Method Type 4 : Strain Energy
3. コンポーネント画像
4. 入力／出力値
- 入力データ
| Index | Name | Description | Type | Default |
Previous |
|---|---|---|---|---|---|
| 1 | KEY | Spectrum Load Case ID | Integer | - | - |
| 2 | NAME | Spectrum Load Case Name | String | - | - |
| 3 | DESC | Description | String | - | - |
| 4 | ANGLE | Excitation Angle | Real | 0 | - |
| 5 | SCALE | Scale Factor | Real | - | - |
| 6 | PMFT | Period Modification Factor | Real | - | - |
| 7 | aFUNCNAME | Spectrum Name | String | - | - |
| 8 | aUSEMODE * |
Mode List [Use,Factor] |
Array [Boolean,Real] |
- | - |
| 9 | Direction | Direction | Select | X-Y | - |
| 10 | Modal Combination Type | Modal Combination Type | Select | CQC | - |
| 11 | Add signs to the results | Add signs to the results | Select | false | - |
| 12 | Add signs to the results type | Add signs to the results type | Select | Along the Absolute Maximum Value | - |
| 13 | Select mode shapes | Select mode shapes | Select | false | - |
| 14 | Interpolation of spectral data | Interpolation of spectral data | Select | Linear | - |
| 15 | Correction by Damping Ratio | Correction by Damping Ratio | Select | false | - |
Activation Condition
* Only for if Select mode shapes is true
- 出力データ
| Index | Command | Description | Type | Method |
Next |
|---|---|---|---|---|---|
| 1 | SPEC |
Create RS Load Cases (Strain Energy) |
Json | PUT/DELETE | - |
5. APIマニュアル参照リンク