If you have modeled a bridge using the FSM Bridge Wizard function, the automatically generated group names are as follows:
Structure Group
CSn
The main girder activated in the nth construction stage.
Bridge Girder
All the main girders
Boundary Group
Start_Roller
Roller support conditions for the beginning abutment activated at construction stage CS01.
Piern_Roller
The roller support conditions for the nth pier in construction stage CSn.
Pierm_Fix
The fixed support conditions for the mth pier, which was specified as a fixed support location in the Wizard, activated at the construction stage CSm.
Pier1_Fix
Temporary fixed support conditions applied at the first pier location before the construction stage reaches the pier location specified as a fixed support in CSm. These temporary fixed support conditions are activated in CS1 and deactivated in CSm.
Pier1_Roller
The roller support conditions applied again to the first pier after the temporary fixed support conditions have been applied to it and the construction stage has progressed to the pier location specified as a fixed support in CSm. These roller support conditions are activated in CSm.
Endn_Roller
Roller support conditions for the last abutment during the construction stage immediately prior to the final stage.
Load Group
Self Weight
The self-weight of the elements, which is activated in the first construction stage and applied as soon as the elements are created.
WCn
The self-weight of the wet concrete and the MSS girder for the nth construction stage, which is activated in CSn.
PSna
The tension in the outer tendons (cycle by cycle)
PSnb
The tension in the inner tendons (cycle by cycle)