Skip to main content
General Spring Created Edited

General Spring Supports

Function

  • Enter general spring support with 6x6  coupled matrix for stiffness, damping and mass, which includes the components related to other degrees-of-freedom with respect to GCS or node's local coordinate system for selected nodes.
  • Define the general spring support matrix first to enter the general spring supports.

 

Call

From the main menu, select [Boundary] tab > [Springs] group > [General Spring] > [General Spring Supports]

 

Input

Boundary-Spring Supports-General Spring-General Spring Support.png

General Spring Supports dialog box

 


 

The right ... button of General Spring Supports

Display General Spring Supports Table

 


Boundary Group Name

Select a Boundary Group in which the specified boundary condition is included. Select "Default" if Group assignment is unnecessary. Click the ... button to the right to prompt the "Define Boundary Group" dialog box to add, modify or delete Boundary Groups.

 


Options

Add/Replace : Enter or replace new general nodal spring support matrix of selected nodes

Delete : Delete previously entered general nodal spring support matrix of selected nodes

 


General Spring

General Spring Type

Select general nodal spring stiffness to be entered from the previously defined general spring stiffness.(Refer to "Define General Spring Type")

Click the ... button to the right to display the General Spring Type dialog box.

SDx : Spring stiffness in GCS x-direction (or node's local x-direction when defined)

SDy : Spring stiffness in GCS y-direction (or node's local y-direction when defined)

SDz : Spring stiffness in GCS z-direction (or node's local z-direction when defined)

SRx : Rotational spring stiffness about GCS x-axis (or node's local x-axis when defined)

SRy : Rotational spring stiffness about GCS y-axis (or node's local y-axis when defined)

SRz : Rotational spring stiffness about GCS z-axis (or node's local z-axis when defined)

NOTE.png The above 6 spring stiffness values represent only the 6 diagonal terms in the 6 x 6 stiffness matrix entered in General Spring Type.

Mass : When the mass matrix is defined in Define General Spring Type, "Considered" is displayed. When there is no mass matrix defined, "None" is displayed.

Damping : When the damping matrix is defined in Define General Spring Type, "Considered" is displayed. When there is no damping matrix defined, "None" is displayed.

0
Was this article helpful?