Function
- Enter the design code applicable for strength verification of SRC (Steel-Reinforced Concrete composite) members.
Call
From the Main Menu select Design > SRC Design > Design Input Data > Design Code Option.
Input
Design Code
SRC design code (Default = SSRC79, refer to Note 1)
Apply Special Provisions for Seismic Design
Not available
The OK Button : Enter the selection and close the dialog box.
The Close Button : Do not enter the selection and close the dialog box.
Note 1
If the user does not specify the design code, the allowable stress design (A Specification for the Design of Steel-Concrete Column, 1979) of the American SSRC (Structural Stability Research Council) will be used.
The available SRC design codes are as follows :
- The allowable stress design of the American SSRC (Structural Stability Research Council) (SSRC79)
(available upon request)
- Taiwan SRC Design Specifications and Commentary of Buildings (TWN-SRC100)
- Taiwanese SRC Design Specifications and Commentary of Buildings (TWN-SRC92)
- China Standard (JGJ138-01)
- Structure Design Code of the Architectural Institutes of Japan(AIJ-SRC01)
- Structure Design Code of the Architectural Institutes of Korea (AIK-SRC2K)
Note 2
The allowable stress design of the American SSRC (SSRC79) and the SRC Structure Design Specifications of the Architectural Institute of Korea (AIK-SRC2K) can be applied for SRC composite column members.