Function
Define control parameters of deflection for serviceability check. The function is only activated for Eurocode.
Call
From the Main Menu select [Design] tab > [Type : Cold Formed Steel Design] > [Design Input Data] group > [Design Parameters] > [Serviceability Parameters]
Input
Select a beam or column member from the Model View to enter the following parameters:
Option
Add/Replace : Add a new value or modify a predefined value.
Delete : Delete a predefined value.
Selection Type
Select all the members ("All") or select the members by using "By Selection".
Deflection Control for Beam
Enter the limiting deflection for beam members.
Deflection Control for Column
Enter the limiting deflection for column members.(h0= height of the building, h=story height)
Deflection Amplification Factor
Enter the Deflection Amplification Factor.