Function
Query design parameters entered for strength verification or design of Frame Type Elements in tables.
"Select" the desired elements first and access the function.
Call
From the Main Menu select [Design] tab > [Type : Steel Design] > [Table] group > [Parameter Tables] > [Design Parameter Detail Table]
From the Main Menu select [Design] tab > [Type : RC Design] > [Table] group > [Parameter Tables] > [Design Parameter Detail Table]
From the Main Menu select [Design] tab > [Type : SRC Design] > [Table] group > [Parameter Tables] > [Design Parameter Detail Table]
From the Main Menu select [Design] tab > [Type : Cold Formed Steel Design] > [Table] group > [Parameter Tables] > [Design Parameter Detail Table]
From the Main Menu select [Query] tab > [Detail Table] group > [Design Parameter Detail Table]
Input
Click the tabs at the bottom of the table window, which are classified by types, to display the desired information table.
The table types are as follows :
Elem : Element type, material property, section, Beta Angle, connecting nodes, etc.
Leng : Laterally unbraced and braced lengths
K : Effective buckling length factors
M_mag : Moment magnification factors
L_rdu : Live load reduction factor
Cb : Bending coefficient
Cm : Moment factors
Cv : Shear coefficient
Sig_allow : Allowable stresses
Ltsr : Limiting slenderness ratio
M_type : Member type