Input
- The members to which special seismic loads and vertical seismic forces have been applied are tabulated by member types and member numbers in the order of application.
- The entered data can be checked and modified/deleted, or new data can be added in the table.
Input
From the Main Menu select Design > RC Design > Table > Parameter Tables > Seismic Design Type Table
Input
Select an item to change/delete, or add data in the table.
Elem : Element (member) number
Member Type
Wall ID : If the applied element is a wall, Wall ID is indicated.
Assignment Type : Special seismic loads or vertical seismic forces applied to the member