Function
- Display the serviceability parameters applied to RC members in a table.
- Modify/Delete existing or Add New data while reviewing the entered data.
Call
From the Main Menu select [Design] tab > [Type : RC Design] > [Table] group > [Parameter Tables] > [Effective Length Factor (K) Table]
Input
When the table shown below is displayed, the user may select relevant items to Modify/Delete, or Add New data.
[Serviceability Parameters Table]
Elem : Element number
Exposure : Exposure Class
Stress k1, k2, k3, k4 : Concrete strength reduction coefficients
Crack Char., Char. Limit : Crack check for Characteristic combination of loads, Limiting Crack Width
Crack Freq., Freq. Limit : Crack check for Frequent combination of loads, Limiting Crack Width
Crack Quasi., Quasi. Limit : Crack check for Quasi-permanent combination of loads, Limiting Crack Width
Deflec. Quasi. : Limiting deflection (1/L)
Deflec. Char. : Limiting deflection (1/L)
DAF : Deflection Amplification Factor