Function
- Select the load combinations for the slab/wall element design.
- Only the load combinations that are specified as Strength/Stress or Serviceability from Result>Combinations are displayed in the load combinations list.
Call
From the Main Menu select Design > Meshed Design > Design Input Data > Design Parameters > Seismic Load Combination Type
Input
Slab/Mat
Select the load combinations to be applied to slab and mat design
Strength
Only the load combinations for which 'Strength/Stress' is selected under the 'Active' column in the 'Concrete Design' tab of Result>Combinations, are displayed in the list.
Default : The load combinations that are composed of DL and LL only are automatically selected.
(Temperature loads are excluded)
Serviceability
Only the load combinations for which 'Serviceability' is selected under the 'Active' column in the 'Concrete Design' tab of Result>Combinations are displayed in the list.
Default : The load combinations that are composed of DL and LL only are automatically selected.
(Temperature loads are excluded)
Deflection (Cracked)
Load combinations for performing cracked section analysis and checking cracking deflections.
In case of Eurocode, only the serviceability load combinations which are classified as "Quasi-permanent" are displayed in the list.
Default : The load combinations that are composed of DL and LL only are automatically selected.
(Temperature loads are excluded)
Wall
The load combinations to be applied to wall design
Strength
Only the load combinations for which 'Strength/Stress' is selected under the 'Active' column in the 'Concrete Design' tab of Result>Combinations are displayed in the list.
Default : All the load combinations are automatically selected.
Shell
The load combinations to be applied to shell design
Strength
Only the load combinations for which 'Strength/Stress' is selected under the 'Active' column in the 'Concrete Design' tab of Result>Combinations are displayed in the list.
Default : All the load combinations are automatically selected.
Description
The description of the load combination, specified in Results>Combinations, is displayed.