Skip to main content
Static Load Tables Created Edited

Nodal Loads Table


  • Enter or modify Concentrated Forces and Moments at specific nodes in a spreadsheet format table.



From the main menu, select [Load] tab > [Type : Static Loads] > [Load Tables] group > [Static Load] > [Nodal Loads]



(Refer to "Nodal Loads")

Refer to Usage of Table Tool and enter or modify the following data:

Load-Load Table-Load Tables-static Load-Nodal Loads.png


Node: Node numbers


Load Case: Select unit load cases


FX: Concentrated load component in GCS X-direction


FY: Concentrated load component in GCS Y-direction


FZ: Concentrated load component in GCS Z-direction


MX: Concentrated moment component about GCS X-axis


MY: Concentrated moment component about GCS Y-axis


MZ: Concentrated moment component about GCS Z-axis


Group: Name of Load Group

Was this article helpful?