Enhancements in GEN 2024 (v1.1)
Improved Steel Design as per EC3 : 2005
1. Seismic Design as per EC8-1 : 2004
2. Improvement of “Check Interaction of Combined Resistance”
3. Add Interaction factor(kij) as per Annex B
4. Calculation of Mcr considering one-way symmetrical section and load position
Wind loads
1. Added Wind loads as per ASCE7-16 & ASCE7-22
Wind Pressure
1. Added Area/Beam/Nodal Wind Pressure in Wind Pressure feature
2. Beam Wind Pressure
3. Area Wind Pressure
4. Nodal Wind Pressure
5. Velocity Pressure
6. Improvement of Wind Pressure function
Rebar Detail Table
1. Support the Rebar detail table according to design provisions
Convenience function added
1. Angle information in Query Dialog
2. Objects selection by load information
3. Improvement of Elastic & General Link Table
Irregularity Check according to NTC 2022 [NTC-DCEC (2017)]
1. Torsional Irregularity & Weight Irregularity
2. Stiffness Irregularity
3. Capacity Irregularity
GEN-Revit 2024 Linker
Interface for GEN - IDEA Statica Connection
Added New Sections
ETC.
1. Application of “fs” calculated by service load combinations
2. Improvement of Cyclic Shear Resistance table
3. Generation of Column Fiber Mode
Please refer to the attached revision note file (Release_Note_GEN_2024_(v1.1)) for detailed information.