Function
Enter the tendon material to be used for PT slab properties. The user should enter the orthotropic material in the User Defined Material.
Call
From the Main Menu
select [Post Tension] tab > [Tendon] group > [Tendon Material]
Input
For new or additional material properties
Click the Add button in the Properties dialog box and enter the following data:
General
Material ID: Material property number
Name: Material property name
Elasticity Data
Type of Design: Select a material property type and enter the related data.
Type of Design = "Steel"
Standard: Select the standards of a country in the field.
None: The user defines the material properties directly. The user may modify the data obtained from the DB standards.
ASTM(S): American Society for Testing Materials
CSA(S): Canadian Standards Association
BS(S): British Standard
BS04(S): British Standards / BS EN 10025 (2004)
DIN(S): Deutches Institut fur Normung e.v
EN(S): European Standard, ENV 1993-1-1
EN05(S): European Standard. The nominal values of the yield strength and the ultimate strength is determined from the simplification given in Table 3.1 of EN 1993-1-1.
EN05-PS(S): European Standard. The nominal values of the yield strength and the ultimate strength is determined from the product standard, EN 10025.
UNI(S): Italian National Standard
GOST(S): Russian National Standard
BC1:12-ASTM/BS/JIS/GB(S): Building and Construction Authority of Singapore, Design Guide on Use of Alternative Structural Steel to BS 5950 and Eurocode 3, Class 1 structural steel
BC1:12-Class2(S): Building and Construction Authority of Singapore, Design Guide on Use of Alternative Structural Steel to BS 5950 and Eurocode 3, Class 2 structural steel
BC1:12-Class3(S): Building and Construction Authority of Singapore, Design Guide on Use of Alternative Structural Steel to BS 5950 and Eurocode 3, Class 3 structural steel
JIS(S): Japanese Industrial Standards
JIS-Civil(S): Japanese Civil Standards
GB03(S): Chinese National Standard
GB(S): Chinese National Standard
JGJ(S): Chinese Industrial Standard
JTJ(S): Chinese National Standard of Highway Engineering
JTG04(S): Chinese Technical Standard of Highway Engineering. Wire and heat treated rebar materials can be selected from DB
TB05(RC): TB 10002.3-2005 (Code for design on reinforced and prestressed concrete structure of railway bridge and culvert)
KS08(S): Korean Industrial Standard (S.I. Units)
KS(S): Korean Industrial Standard
KS08-Civil(S): Korean Civil Standards (S.I. Units)
KS-Civil(S): Korean Civil Standards
IS(S): Indian Standards
CNS(S): Chinese National Standard
DB: Select a steel type recognized in each of the standard codes.
Type of Design = "User Defined"
Select when the material type is not 'Steel', 'RC' or 'SRC', or when the user wishes to define the material properties directly.
Orthotropic material properties can be also defined in ECS. User Defined materials are not used in Design.
Modulus of Elasticity
Poisson's Ratio
Poisson's ratio is used to calculate the Shear Modulus of Elasticity.
Thermal Coefficient
Thermal Coefficient for thermal stress analysis.
Celsius
Fahr
Weight Density
Use Weight Density to calculate self-weights and masses.
Shear Modulus: Shear Modulus of Elasticity(Local-xy, Local-xz, Local-yz)
Shear Modulus of Elasticity = Modulus of Elasticity / (2 x (1+Poisson's ratio))
Note
For Type of Material = Isotropic, Shear Modulus is calculated by the above expression. For Type of Material = Orthotropic, the user defines the values of shear modulii.
Use Mass Density: Mass per unit volume.
Note
If "Use Mass Density" is checked, Mass Density is calculated using the acceleration of gravity(g) given in the DB. If "Use Mass Density" is unchecked, Mass Density is calculated using the acceleration of gravity(g) specified in Model>Structure Type. The Mass is separate from Dead Load and used for eigenvalue analysis only.
To modify previously entered material property data
Select the material property to be modified in the list of the Properties dialog box and click the Modify button to modify the related data.
To remove previously entered material property data
Select the material property to be deleted in the list of the Properties dialog box and click the Delete button.
To copy previously entered material property data
Select the material property to be copied in the list of the Properties dialog box and click the Copy button.
To import material property data from an existing fn.MGB file
Click the Import button and select the MGB file containing the material property data or specify a file name then click the Open button
Material List
Display material property data contained in the existing fn.MGB file.
Selected List
Select material property data to be imported and register them in the Selected List.
Note
If a fn.MGB is selected, all the material property data contained in the existing fn.MGB file are registered in the Selected List.
Numbering Type
Specify the Import mode for material property numbers.
Keep ID.
Import the data keeping the same material property numbers.
New ID.
Assign new numbers to the imported material property data.
To modify previously entered material property numbers
Start number
Assign a new starting number for the material to be modified.
Increment
Enter the increment for numbering material property numbers.
Change element's material number
Modify a material property number. Using this option will modify the previously defined material property number. If this option is not checked, the selected material having previously defined number will become undefined and the additional user-defined material number will be created without any assigned elements.