Function
Assigns load combinations to the design verification categories used in the post-tensioned slab design process.
Call
From the Main Menu
select [Post Tension] tab > [Design] group > [Parameter Table] > [Modify Column Location Table]
Input
Element: Displays the selected support element associated with the design strip.
Column Location: Specifies the location of the support element within the slab system.
Corner: Support located at a slab corner.
Edge: Support located along a slab edge.
Interior: Support surrounded by slab panels on all sides.
Column Face 1: Specifies the first column face direction used as the reference for the support extension.
Distance 1: Defines the extension distance measured from Column Face 1.
Column Face 2: Specifies the second column face direction used as the reference for the support extension.
Distance 2: Defines the extension distance measured from Column Face 2.